King Electric SRK08 GFEP device kit - Manual (Page 12)

2
Lightly score completely around and then down
outer jacket a distance of 7”. Do not cut braid or inner
jacket. Bend heating cable to break jacket at score,
then peel off outer jacket!.
1
The SR heating cable is comprised of several layers as shown
above, use the illustration to gain a clear understanding of the cable
components.
Cut the braid and push it back to loosen it as shown.
Bend the cable and gently pull it through the braid.
Twist and position the braid to one side of heating
cable and then cut the insulating jacket back 4-
1/2”.
Lightly score the inner insulating jacket and then bend
the cable to break the jacket and peel it off.
4 3
www.king-electric.com 12 Rev 11.04.12
Slide the 1”dia. x 8” long and the 1” dia. x 5” long
black heat shrink tubes over the stripped end of the
cord.