King Electric SST 3 - Manual (Page 4)

Adjustable Electronic Thermostat TRACON
®
Model SST–3 (P/N 24492)
Instruction Manual
24494 Rev. - 04/12 (800) 234-4239 http: www.networketi.com Environmental Technology, Inc. 4 of 28
UNPACKING THE UNIT
Immediately upon receipt, inspect the container and packing material for any
noticeable damage. Unpack the unit, taking care not to damage the packing
materials. Save the shipping container and related materials until normal
operation has been established. If the unit must be returned, take care to ensure
that it is repackaged as it was received.
As soon as the unit arrives at your facility, inspect it for mechanical damage. If
any of the following problems is found, contact Environmental Technology, Inc.,
Customer Service immediately:
 contents incomplete or incorrect;
 internal or external mechanical damage; or
 defective operation.
ETI Customer Service is available between 8:00 a.m. and 5:00 p.m. Eastern
Time at (574) 233-1202 or (800) 234-4239. In the event of shipping damage,
keep the packing materials for inspection by the carrier.
RETURNS AND REPLACEMENT PART PURCHASES
Equipment cannot be returned for credit once it has been installed. ETI will
repair or replace faulty equipment under warranty. Prior to removal of equipment
for warranty return, please contact ETI Technical Support at (800) 234-4239 for
troubleshooting assistance.
Before returning a unit to Environmental Technology, Inc., obtain a Return
Merchandise Authorization from our Customer Service Department, available
between 8:00 a.m. and 5:00 p.m. Eastern Time at (574) 233-1202 or (800) 234-
4239. If possible, use the original container and packing materials when packing
the unit for shipment. It is important to mark the Return Merchandise
Authorization clearly on the outside of the shipping container so that it may be
correctly processed upon receipt at Environmental Technology.
For more information about replacement parts or for a replacement Data Sheet
or Manual, please visit http://www.networketi.com/.