Inter-M HDRC-Z440 - Manual (Page 26)

• FACTORY DEFAULT
Select the Factory Default to initialize the Data.
• DOME RESET
This feature is used to re calibrate the orientation
of a selected dome camera. Origin offset value is not affected by this function. (Offset is still valid after
origin set)
• OSD DISPLAY
TITLE : up to 6 characters.
DOME OSD : ON / OFF
All display or title will disappear when DOME OSD DISPLAY sets OFF
FOCUSE EXPOSURE : ON / OFF
ON: FOCUS and EXPOSURE displays. (AF AE)
• SYSTEM SETUP
FACTORY DEFAULT
ARE YOU SURE ?
CANCEL
OK
DOME RESET
ARE YOU SURE ?
CANCEL
OK
OSD DISPLAY SETUP
TITLE : DOMEID
DOME OSD : ON
FOCUS EXPOSURE : ON
SAVE AND EXIT
SYSTEM MENU
MOTOR SETUP
ORIGIN CHECK
CALIBRATION : ON
MENU TIME OUT : OFF
DOME ANSWER : ON
PST FOCUS : AUTO
SAVE AND EXIT