Inter-M HDRC-Z440 - Manual (Page 19)

3.9 Privacy Zone
Hide up to 12 unwanted scenes in a camera.
PRIVACY ZONE SETUP
N CTRL KEY
01 ON BLOCK BLACK
02 ON BLOCK GRAY
03 ON BLOCK BLACK
04 ON BLOCK BLACK
05 ON BLOCK BLACK
06 ON BLOCK BLACK
NEXT
SAVE AND EXIT
1. Place the cursor at the title field.
2. Holding down the CTRL key displays the privacy area menu while selecting the position using the
Joystick. Current position will be displayed. Release CTRL key to complete the selection of the position.
Or Press IRIS Open then the privacy area menu displays. Move the desired position. Press IRIS Close
then the “CTRL” disappears and returns to the previous menu.
3. Place the cursor at the title field. Twist the Joystick to enter the title edit mode. Follow the procedure of
the auto scan above to edit titles.
4. To turn the stored zone On or Off, twist the Joystick handle or press Tele or Wide Key.
5. Set the method, “BLACK” or “GRAY”
6. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the program by
pushing the Joystick to the right. Press ESC to exit the program without saving.
Press the HOME key to delete programmed privacy zone at the title field.
PRIVACY AREA MENU
CTRL KEY
NUMBER 001
354.8 344.8
EXIT