Harrington Hoists and Cranes TCR Hoist - (1/4-6 Ton) User Manual
Page 21
21
3.12.4
For Models TCR-250P&C, 500P&C, 1000P2&C2, 1000P&C and 2000P2&C2
verify the limit locks are properly installed on the load chain. For reference see
Figure 3-8
for hoist
versions 1, A, B and C and
Section 7.3.2
. For Models TCR-3000P&C and 6000P2&C2 verify that the
chain/limit lever is operational and can move freely in both the up and down directions. For reference
see
Figure 3-9
.
Versions 1, A and B
Version C Only
Figure 3-8
Limit Switch Components
Figure 3-9
Limit Switch Components
3.12.5 Measure and record the “K” dimension of all hooks on hoist. See
Table 5-6
under
Section 5
,
“Inspection”. Always use the same side of the hook to measure and record the "K" dimension.
3.12.6 Record the hoist Code Number and Serial Number (from the nameplate on the hoist – see
Section 10
)
in the space provided on the cover of this manual.