SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 8)

6
Connection Error Box
If an error box displays (Figure 2B), follow this procedure:
a. Ensure pump LCD is activated. See
Step 2 on page 4.
b. Check cable/adapter connections and
click Retry. If the error box displays
again, go to Step c.
c. Ensure the COM ports for the
adapter cable are numbered between
1 and 9. See changing the COM Port
box below.
Note: Another option in the error box is Ignore. Clicking Ignore opens the
SKC DataTrac Pump Manager window but only allows limited access to
soft ware features.
Changing the COM Port
To change the COM port:
1. Ensure DataTrac adapter cable is connected to a USB port.
2. Click Start menu.
3. Right click on My Computer.
4. Select
Manage.
5. Select Device Manager.
6. Expand
the Ports (COM & LPT) menu.
7. Double-click to select USB Serial Port
(COM10 or similar).
8. Select Port Sett ings.
9. Click
on Advanced.
10. Select a COM port between 5 and 9 from
the COM Port Number dropdown menu.
11. Click OK to close.
12. Follow instructions for Connecting the
Pump to a PC (see page 4).
Figure 2B.
Connection error box
COM Port Window
DataTrac 2000 Setup