SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 34)

32
Timed Run ...................................... Pump running a preset sampling time (S┌ function)
Sleep ................................................ pump in Sleep mode
Pre-Cal Flow ................................... First calibration average, date, and time when using the single-point
CalChek
feature
Post-Cal Flow .................................. Final calibration average, date, and time when using the single-point
CalChek
feature
Parameter Value
Flow Rate ..............................fl ow rate in mL/min
Start Date ..............................start date of the program
Start Time .............................start time of the program
Volume (Liters) ....................fl ow rate multiplied by the duration
Accum Volume ....................sum of all previous volumes (liters)
Duration ...............................total run time of the program
Environmental Data Window
The Environmental Data window in the View menu under Temperature/Pressure
Data (Figure 37) shows the temperature and pressure data of the air entering the
connected pump.
This window displays the pressure and temperature data accumulated since the
pump’s history was cleared. To clear the accumulated temperature and pressure
data, close the Environmental Data window and select Clear History from the Tools
menu or click the Reset Volume, Temp, Time, and Pressure Butt on in the Real Time
Monitor window (see page 10).
SKC Pump History Window
Figure 37. Environmental Data Window