SKC DatraTrac 2000 for the AirChek 2000_3000 - Manual (Page 17)

15
Units Selection Buttons
The Units Selection butt ons (Figure 11) select the temperature and pressure scale
of the connected pump.
Units Selection Function
Fahrenheit ........................................selects the Fahrenheit temperature scale
Celsius ...............................................selects the Celsius temperature scale
in-Hg .................................................selects the inches Hg pressure units scale
millibars ............................................selects the millibars pressure units scale
mm-Hg ..............................................selects the millimeters Hg pressure units scale
Fault Options
The Fault Options (Figure 12) select the time the pump spends in fl ow fault mode
and the number of times the pump att empts to restart.
Fault Options Enter Value
Time to Fault (sec).. ................. click on the box and enter a number from 5 to 240.
This value is the number of seconds the pump
spends in Flow mode before going into Flow Fault
Hold mode.
Number of Tries....................... click on the box and enter a number from 0 to 25. This
value is the number of times the pump att empts to
restart once it goes into Flow Fault Hold mode.
SKC Real Time Monitor Window
Figure 11. Units Selection Buttons
Figure 12. Fault Options