SKC 210-5000 AirChek XR5000 - Manual (Page 3)

AirChek XR5000 Quick Guide
Keypad Basics
 (star key) Scrolls through parameters in user setup functions.
 (up/down arrow keys) Increase or decrease fl ow rate, timed run, and run delay time.
Key Sequences
 
Press keys individually.
[
]
Press keys simultaneously. Toggles between Run and Hold
and exits user setup functions.
 Security code to access user setup functions. With pump in a
non-running state (no fl ashing blue LED), press keys in
sequence.
Operation
• Pump On Press and hold .
• Pump Off Press and hold  through countdown. Auto-off will shut down
pump after 5 minutes without activity.
• Mode Change Press [ ] to toggle between Run and Hold.
• Keypad Lock Press  5 times quickly to activate. Press  5 times quickly
to deactivate.
• Run/Hold With pump in a non-running state (no fl ashing blue LED),
press [
] to run pump. Press [] to Hold pump when
completed.
Accessing User Setup Functions
• Entering User Setup Functions
With pump in a non-running state (no fl ashing blue LED), press .
• Exiting User Setup Functions
Press [ ]. Pump is ready. Press [] to run the pump or to start a run delay.
User Setup Functions
To navigate while in user setup functions, press  until the desired function displays.
Function When LCD Displays User Action Result
Clear Accumulated
Run Time
Function only available
when accumulated run
time exists.
CLr and fl ashing
Hold Press [
]. Clears run and run
time and exits func-
tions. Press [
] to
run pump.
Adjust Flow Rate
*
“---” and fl ashing
ADJ Flow Press
 or .
Press [ ] to exit
functions.
Flow increases/
decreases. Press
[
] to run pump.
Set Timed Run
†
Flashing Set Timed
Run and min Press
 or .
Press [
] to exit
functions.
Minutes increase/
decrease. Press
[
] to run pump.
Set Run Delay
†
Flashing Set Run
Delay and min Press  or .
Press [
] to exit
functions.
Minutes increase/
decrease. Press
[
] to start run
delay. Blue LED
fl ashes. Pump starts
after delay elapses.
* Changing fl ow rate in user setup functions will not clear accumulated run time.
† Changing timed run and/or run delay settings in user setup functions will clear accumulated run time.
www.skcinc.com