SKC 210-5000 AirChek XR5000 - Manual (Page 14)

11
f. At the end of the run, the pump will stop and “Timed Run Remaining” and “0”
will display. To display accumulated run time, press and hold .
g. To return to “Timed Run” display, press []. This will also clear accumulated
run time.
If pump goes to sleep following the timed run and is awakened, the pump
will display “Timed Run Remaining” and “0.” Accumulated run time from the
run remains and can be displayed by pressing and holding
.
When setting a timed run or run delay with a large number of minutes in user
setup functions, press
 with  or . This activates the speed count feature
which scrolls through timed run or run delay minutes in increments of 100.
Pressing [
] after a completed run automatically clears accumulated run
time.
Canceling a Timed Run and/or Run Delay
With pump in a non-running state (no fl ashing blue LED):
1. Press  to enter user setup functions.
2. Press  until fl ashing Set Timed Run and min appear
on the display.
3. Press  until time displays as 0.
4. Repeat for Run Delay if needed.
5. Press [] to exit user setup functions. Pump will be ready to run.
Selecting CLr in user setup functions after a sample run will clear accumulated
run time only. It will not clear Timed Run or Run Delay time settings.
Setup
Tip
Reminder
Note
Note