SecurityMan FlashDVR - Manual (Page 17)

16
WARNING 1: Before submerging FlashDVR: Microphone port must be plugged in with the
mic waterproof plug. The rear Waterproof Plug must be secure and tight.
WARNING 2: After underwater recording; switching from LOCK mode back to ON mode must
be precise; and cannot be over switch to OFF mode as recorded data will be lost. Take your
time and extra precaution when switching from LOCK to ON.
Flashlight DVR Characteristics
• Continuous recorded video file will automatically be saved as an incremental
file of ~1GB in size which is roughly 25~30 minutes of playback time per file.
• When the memory is full or the battery is drained, the Light Indicator Window
flashes red and the LED flashlight will flash once and then turns off. The
built-in memory of 4GB capacity can record 2 hours of continuous video
footage. Once full, it is necessary to connect the Flashlight DVR to a PC
to download and delete to empty and restore the memory capacity for
more recording.
• Avoid sliding the Main LOCK/ON/OFF Switch to the OFF position during record
mode as the recorded video data will NOT be saved.
• During charging or connection to a PC, Flashlight DVR cannot be use; cannot
record, cannot turn on flashlight.
• If the battery is drained, the Light Indicator Window will turn red, and the video
file will automatically be saved before shut down.
• In the recording, if the indicator light turns solid blue it means that the built-in
memory is full.
• If the computer cannot play the video file, please install the video player
software from http://mpc-hc.sourceforge.net/ Media Player Classic (MPC) or
latest update Window Media Player available.