SecurityMan FlashDVR - Manual (Page 11)

10
Time & Date Setup
Before using FlashDVR, test by recording a video file clip. Then plug the
DVR into a personal computer to playback (see USB connection & PC Playback
page 17). Check the Time/Date stamp of the recorded video file to be current up
to date. If the Time/Date stamp is not up to date, follow the procedure below to
reset the Time and Date:
1. Prepare a computer running windows 2000/ XP/ Vista/ 7 with current
Time/Date.
2. Connect the Flashlight DVR to a computer using the USB cable and a window
will appear as shown below. Select “Continue without scanning” to continue.
And then select “Open folder to view files” to get to the root explorer of Flash-
light DVR directory.