SecurityMan FlashDVR - Manual (Page 14)

13
Operation
Power ON DVR & Flashlight Use
Remove the Waterproof Plug from the back of the FlashDVR to get to the Main
LOCK/ON/OFF Switch. Slide the main switch to the ON position (default OFF,
Fig-1 below) to turn on the FlashDVR. Press the Flashlight button once to turn
ON the LED flashlight (Fig-2 below). Press the Flashlight button again to turn
OFF the LED flashlight. The LED flashlight can be use as a practical flashlight
or it can be use to aid the DVR for night time recording. On a fully charged
battery, the flashlight run time can last up to 6 hours of continuous lighting
without the use of the DVR. When the battery is drained in flashlight mode, the
LED flashlight will flash once to indicate battery is drained and then turns off.
Main ON/OFF/LOCK Switch
In the left: lock
In the middle: on
in the right: turn OFF the power
Flashlight button
Record/Stop
button
Light indicator
window
Fig-1 Fig-2 Fig-3