SecurityMan DVR-04 - Manual (Page 9)

9
5.4 Record Mode
There are two modes for video recording.
Each Mode
Compress and record each channel video separately, therefore, user can enlarge single channel
video to full screen display. For example, user can turn off record function of CH1 and CH2 to have
the system only record CH3 and CH4 video.
Press “ CH1”, “ CH2”, “ CH3”, “ CH4” ,“ Quad”
to switch channel display when viewing recorded video.
Quad Mode
Compress and record all 4 channel video into one file, therefore user can not enlarge single channel
to full screen. User cannot use the each mode record in this mode.
5.5 Record Frame Rate
The record frame rate will affect the movement of an object in the recorded video. More frames
means more smooth movement and uses more hard disk space. System default value is 30 fps, that
means the system will record 30 frames per second. The frame rate value can be set to
30,15,10,7,5,4,3,2,1 frames per second.
5.6 Video Quality
There are three levels of video quality for recording, High, Normal and Low. Higher quality uses
more hard disk space.
The record frame rate, record quality, and hard disk space will affect the total recording time of the
DVR system.
5.7 Record Schedule
Setup video record method by time, sensor triggered and motion triggered.
• “-” No Record
• “T” Continuous (System Default)
• “S” Sensor Triggered
• “M” Motion Triggered
The DVR cooperates with many kinds of external
sensor equipment like PIR and gas sensor. The DVR
will not record video until the sensor is triggered and
the output signal notifies the DVR during this speci-
fied period of time.
Button function:
“ Up”, ” Down” :Move the prompt
“ Select”
:Select method
+TTTMTMTMTTTMTTMTTTSSS+
0 3 6 9 12 15 18 21 24
DVR Setup