SecurityMan DVR-04 User Manual
Page 6
6
4.1 Detect Installed Hard Disk
4.2 Recover Lost Data
4.3 Restore Recording Process
When a power-error occurs during a recording
process, the system will automatically restore the
recording process after power is reconnected.
POWER ERROR DETECTED
RESTORE HARD DISK............
(MASTER) OK
RESTORE REC MODE..............
OK
Power-Error will cause data lost and system will ask
to ‘recover data’. Please press “ Select” to pro-
ceed with data recovery.
MASTER: RECOVER HDD?
04811-101735
(SELECT) YES/(MENU)NO
Connect the power cord and turn the DVR switch on.
The system will boot-up and detect installed hard
disk. The monitor display will show Master and Slave
hard-disk information.
Please refer to the hard disk section of the manual to
configure hard disk sequence. (Master or Slave)
HDD Checking..................
MASTER HARD DRIVE
IBM-DHEA-36481
SLAVE HARD DRIVE
DVR Installation