SecurityMan DVR-04 - Manual (Page 8)

8
5.1 Setup Menu
5.2 Camera Select
The DVR system can display 4 camera video pictures in one screen (Quad Mode). User can config-
ure which camera to display.
Press “Select” to modify the setting when programming, and press
“ CH1”, “ CH2”, “ CH3”, “ CH4”
to view each camera separately. When the menu channel space has a “ ”, the DVR will display
“OFF” on that corresponding channel.
5.3 Record Select
Configure which channel is allowed to record by pressing “ Select” to display channel number or
“ ”, to disable recording for the corresponding channel.
Camera Select
Record Select
Record Mode
Record Frame Rate
Video Quality
Record Schedule
Sub Menu
Hard Drive Setup
Sensor Setup
Motion Setup
Main Menu
Password Change
Time Set
Picture Set
Password Set
Buzzer Time
Press “ Menu” to enter setup menu
Use “ Up” and “ Down” to browse
Press “ Select” to modify setting
Press “ Menu” to confirm and exit
MAIN MENU
CAMERA SELECT 1234
RECORD SELECT 1234
RECORD MODE EACH
RECORD FRAME RATE 30FPS
VIDEO QUALITY
NORMAL
RECORD SCHEDULE
SUB MEUN
HARD DRIVE SETUP
SENSOR SETUP
MOTION SETUP
PRESS (< , >). THEN (SELECT)
PRESS(MENU) TO EXIT
>
DVR Setup