SecurityMan NDVR8 Series - Quick Start Guide - Manual (Page 6)

11
SPECIFICATIONS
NAME
Play/Stop
Snapshot
Full Screen
Channel Group
Channel Select
Setting
Tilt UP
Tilt DOWN
Pan LEFT
Pan RIGHT
Zoom IN
Zoom OUT
Focus adjustment
Focus adjustment
Aperture adjustment
Aperture adjustment
ACTION
Starts and Stops the live view feed from the selected
live view display box.
Takes a snap shot of the current camera.
*Images are saved in the “Photos” of the iPhone.
Tap to bring up full screen display.
Changes the “Channel Select” numeric values.
Pressing the channel group button will change the
values from 1-8 to 9-16.
*Only applies to devices that are equipped with more
than one channel.
Used to select which channel to display on the live
view screen.
*Only applies to devices that are equipped with more
than one channel.
Setup Direct Access (LAN, WAN) or Server Access
(WAN only) remote access.
Tilts the camera upward.
*Only applies to cameras with PTZ capabilities.
Tilts the camera downward.
*Only applies to cameras with PTZ capabilities.
Pans the camera to the right.
*Only applies to cameras with PTZ capabilities.
Zooms in.
*Only applies to cameras with PTZ capabilities.
Zooms out.
*Only applies to cameras with PTZ capabilities.
Used to focus the image after zooming in/out.
*Only applies to cameras with PTZ capabilities.
Used to focus the image after zooming in/out.
*Only applies to cameras with PTZ capabilities.
Lets you adjust the light level.
*Only applies to cameras with PTZ capabilities.
Lets you adjust the light level.
*Only applies to cameras with PTZ capabilities.