SecurityMan NDVR8 Series - Quick Start Guide User Manual
Page 3
5
6
IMAGE #1
IMAGE #3
IMAGE #2
IMAGE #4
IMAGE #5
REMOTE ACCESS USING INTERNET EXPLORER
ActiveX controls and Plug-ins:
1.
Enable all Active X controls located in your in your IE Internet options.
To do so, click on “Tools> Internet Options” as shown below [IMAGE
#1/#2].
2.
Click on the “Security” tab as shown in IMAGE #3. Then click on
“Internet” and “Custom level”. In the Security Settings window, please
set “Enable” everything under “ActiveX controls and plug-ins” as
illustrated in IMAGE4. Click OK button to accept and exit out from
Security Settings and click “Yes” to accept the confirmation.
3.
After confirming your changes, click on “Apply” and “OK” (red arrow) to
close the Internet Options as shown in IMAGE #5.
Remote access within the same network (LAN):
1.
After the ActiveX controls and plug-ins setup, open by right mouse
clicking on the IE browser and then select “Ran as administrator” on the
computer that is outside of your network. Once the browser is opened
and type “ http://www.ipremoteview.com “ in the URL.
NOTE: If http://www.ipremoteview.com does not work, please use our
alternative server http://www.ipremoteview.cn for AutoID remote
access.
2.
After pressing ENTER, you will be prompted to install the “VIEW_
DvrOcx.ocx” when logging in for the first time. Please click on the
“Allow” button to install the required plug-in as illustrated with the red
arrow below.