Salamander Designs Synergy System SU40RMC/B User Manual

Rack mount, Synergy, Kit to accommodate door

12x

(300-485)

1/2” Button Head

Screw

(301-360)

Mounting Screw

(300-560) - Flat Nut

5/32” Hex Key - (400-080)

1/8” Hex Key - (400-070)

Limited Warranty

For five full years Salamander Designs Ltd. will repair or
replace, at our option, any product defective in materials
or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage to or destruction of other
equipment consequential to our equipment failure. Defective
product must be given Return Authorization and is to be
returned to the factory prepaid, in the original carton and
packing material. Any damage incurred in a shipment not
in original packaging shall be the responsibility of the owner.
Warranty repairs will be returned prepaid, via UPS within
the continental U.S.A. only.

www.SalamanderDesigns.com

800-535-5659

SYNERGY

RACK MOUNT

300-518

300-520

OPTION: INSTALLING GEAR FORWARD

Rack rails may also be installed with the flange forward in

applications the door is not desired and additional cabinet

depth is needed.

A. Place the 1/2” Button Head Screw (300-485) in the

holes of rack mount rail and hinge bracket and loosely

screw to Flat-nut (300-560).

Note: Rackmount brackets that have a triangle

must locate at the top.

B. Slide Rack Mount Rail into position with the Flat Nuts

sliding into the channel as shown. After bracket is in

position tighten all screws with hex key.

C. Snap door onto hinge bases align top and

bottom gap and tighten.

For 15 and 21U rails:

D. Install header panel at the top same

location of rack mount.

KIT TO ACCOMMODATE DOOR