Salamander Designs Synergy System SBX/B - Manual

Remove the four connector bolts securing the top shelf
from each of the base units. Save for Step 5 Put the small button head screws through the round holes on the end
brackets, attach flat nuts and slide into posts. Tighten with small hex
wrench.
Attach one bracket to each base unit.
Parts
1 - Bridge Shelf 2 - Bridge Shelf Brackets
(400-060) - 3/16” Hex Key
1x
(400-080) - 5/32” Hex Key
4x
(301-265)
Joint Connector Nut
4x
(301-260)
Joint Connector Bolt
4x
(300-485)
Button Head Screw
2x
(301-280)
Plastic Cap Plug
1x
4x
(300-560)
Flat Nut
1
Remove Top Bolts
2
Install Brackets
SYNERGY BRIDGE
- SB2 / SB3 / SBX