Salamander Designs Synergy System SB329C/B - Manual (Page 3)

B
.
Fine Tuning
Use the bubble level to precisely adjust
the adjustable shelves. Be sure to level
both sides as well as front to back. Use
the hex key to tighten each peg.
A
.
Adjustable Shelves
Place shelves from the bottom up. Angle
the shelf in between the front post and set on
top of shelf pegs. Use the Spacer Tool to
adjust spacing between shelves. Position the
peg through the Spacer and tighten.
D.
Double-Width Shelf
Place double-width shelf on brackets.
C.
Rubber Pads
Place rubber pad on top of center post.
A
C
D
A
.
Insert Side Panels
Carefully slide side panels down
outside posts. Be sure the posts are
square to the bottom shelf to prevent
any damage to side panels.
Doc No. 501-100/v9.06 329 -3/4
4
Placing Shelves
B
.
Secure Top
Secure top with the 5 connector bolts.
Place the plastic plugs in the front center hole.
5
Sides and Top Assembly