Robertshaw 9405 - Manual (Page 8)

4. Put the -ON-AUTO switch into the ON
position. The blower fan should turn on.
The display will show a and ON.
5. Put the -ON-AUTO switch into the AUTO
position. The blower fan should turn off.
Step 4: Customizing the Thermostat
◆ Settings
System
Off:
The heating system is off.
Heat: The thermostat controls the heat.
Fan
Auto: Equipment controls the fan.
On:
The fan operates continuously.
Temperature
Heating: The default temperature for heating is 70°F (21°C). To
change the default setpoint, put the system switch in HEAT and
press the
ٙ or
ٚ
button to adjust the temperature setting up or
down. The display will show SET. The display will return to the
current room temperature three seconds after the last input and
the new setpoint will be saved.
8
ROOM
°F
OFF
Figure 7