Installing model 9515 thermostat – Robertshaw 9515 User Manual

Page 3

4. After labeling wires, remove wires from terminals.

5. Remove existing thermostat base from wall.

6. Refer to the following section for instructions on how to

install thermostat.

Installing Model 9515 Thermostat

NOTE: F

OR NEW INSTALLATIONS

MOUNT THERMOSTAT ON INSIDE WALL

, 5

FEET ABOVE THE FLOOR

. D

NOT INSTALL BEHIND A DOOR

IN A CORNER

NEAR AIR VENTS

IN DIRECT SUNLIGHT

OR NEAR ANY HEAT OR

STEAM GENERATING FIXTURES

. I

NSTALLATION AT THESE PLACES WILL AFFECT THERMOSTAT OPERATION

1. Turn power off to the heating

and cooling systems.

2. Place COOL-OFF-HEAT

in OFF position.

3. Place AUTO-ON

switch

into AUTO position.

4. Remove the cover using a coin

or screwdriver (Figure 2).

COOL-OFF-HEAT

AUTO - ON

AUX

COOL-OFF-HEAT

AUTO - ON

Figure 1

Figure 2