beautypg.com

Network log messages – ADTRAN 1200070L1 User Manual

Page 150

background image

Appendix B: Log Messages

134

Express XL/XLT User Manual

61200.070L1-1

Retrieved
level 5
The Express XLT has retrieved a previously held call. If no caller ID is avail-
able for the ISDN line, then will be blank for incoming calls.

Ring
level 5
An incoming call from was ringing. If no caller ID is available for
the ISDN line then will be blank.

SOURCE NOT ISDN
level 4
The incoming calling party is not ISDN. This is a warning and is most often
seen for POTS calls.

Signal 0xNN
level 4
A signal information element was received from the ISDN switch with the val-
ue NN in hexadecimal.

Transfer
level 5
The Express XLT has transferred the held call with the active call. If no caller
ID is available for the ISDN line, then will be blank for incoming
calls.

Transfer Rej
level 5
The Express XLT attempted to transfer but was reject by the ISDN switch. If
no caller ID is available for the ISDN line then will be blank for in-
coming calls.

Network Log Messages

Attempting to add bad IP iface route: ifnum= dest=
level 4
An IP address could not be used for the interface number .

DHCP couldn't alloc mem
level 1
A DHCP response could not be generated due to memory allocation problems.

This manual is related to the following products: