RECON 264135BK & CL Round Fender Lenses (Jeep Wrangler JK) User Manual
Page 7
- Place The Recon Lens Inside The Fender The Same Way The OEM Lens Was Removed
- Clip The Bottom Hooks Back Up In Place
- Pull The Lens Wires Through The Hole
- The Push The Top Clip Securely In Place
Connecting The Wires & Final Steps
- Cut The OEM Connector
- Strip The Wires
- Connect The Other End Of The Connector Previously Installed On The Lens
- Using The Heat Gun Shrink The Connectors