RECON 264135BK & CL Round Fender Lenses (Jeep Wrangler JK) - Manual (Page 2)

A Good Assortment of Hand Tools is Recommended, Required Hand tools are as
Followed:
- Plastic Button Remover
o OR: Channel Locks
o 1” Socket
o Small To Medium Sized Allen Key
- Wire Strippers / Crimpers
- Flat Head Screw Driver
- Heat Gun
- Electrical Connectors / Heat Shrink Tubing
- Needle Nose Pliers
On To The Tear Down.
-
It Is Not Required, but Disconnecting Your Batteries Negative Cable Is Recommended
Start by Removing The Buttons In The Fender & Fender Lining.
- On The Outer Fender, Remove The 2 Button Pins Holding The Fender (Red Arrows)
- Using The Channel Locks, Secure The Socket To The Top Jaw