Ransburg 9040 Classic HV Power Supply 76447 - Manual (Page 8)

CP-97-02.5
9040 Classic for REA & M90 Systems - Safety
5 5 5 5 5
A R E A A R E A A R E A A R E A A R E A
Tells where hazards
may occur.
H A Z A R D H A Z A R D H A Z A R D H A Z A R D H A Z A R D
Tells what the hazard is.
S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S
Tells how to avoid the hazard.
Toxic Substances Toxic Substances Toxic Substances Toxic Substances Toxic Substances Certain material may be harmful if
inhaled, or if there is contact with
the skin. Follow the requirements of the Material Safety Data
Sheet supplied by coating material manufacturer.
Adequate exhaust must be provided to keep the air
free of accumulations of toxic materials.
Use a mask or respirator whenever there is a chance
of inhaling sprayed materials. The mask must be
compatible with the material being sprayed and its
concentration. Equipment must be as prescribed by
an industrial hygienist or safety expert, and be NIOSH
approved.
Personnel Safety Personnel Safety Personnel Safety Personnel Safety Personnel Safety Skin puncturing by sharp electrode. Take precautions to see that flesh is not punctured by
sharp electrode.
Personnel Safety Personnel Safety Personnel Safety Personnel Safety Personnel Safety
(High Pressure
Equipment) Fluid Injection Injury Never let any part of the body come in direct contact
with the fluid stream exiting from the nozzle. If fluid
leaks occur in the applicator or in the fluid delivery
components, depressurize fluid system before
servicing.
Never aim the applicator at any part of the body under
any circumstances.
If you are injured by high pressure fluid injection then
immediate medical treatment MUST be sought.
ARCHIVE