Ransburg 9040 Classic HV Power Supply 76447 - Manual (Page 13)

CP-97-02.5
SPECIFICA SPECIFICA SPECIFICA SPECIFICA SPECIFICATIONS TIONS TIONS TIONS TIONS
Physical Physical Physical Physical Physical
Height: Height: Height: Height: Height: 14-inches
Width: Width: Width: Width: Width: 12-inches
Depth: Depth: Depth: Depth: Depth: 6-inches
Weight: Weight: Weight: Weight: Weight: 24-lbs.
Electrical Electrical Electrical Electrical Electrical
I N P U T I N P U T I N P U T I N P U T I N P U T
Voltage: Voltage: Voltage: Voltage: Voltage: 90-264 VAC
Current: Current: Current: Current: Current: 0.6/0.3 Amps AC
Frequency: Frequency: Frequency: Frequency: Frequency: 50/60 Hertz
Wattage: Wattage: Wattage: Wattage: Wattage: 60 Watts (maximum)
O U T P U T O U T P U T O U T P U T O U T P U T O U T P U T
Voltage: Voltage: Voltage: Voltage: Voltage: 0-65kV DC (76447-10x)
0-85kV DC (76447-14x)
0-90kV DC (76447-12x)
0-100kV DC (76447-13x)
Current: Current: Current: Current: Current: 200 Microamps (maximum)
1 0 1 0 1 0 1 0 1 0
9040 Classic for REA & M90 Systems - Introduction
The 9040 Classic Power Supply is avail- The 9040 Classic Power Supply is avail- The 9040 Classic Power Supply is avail- The 9040 Classic Power Supply is avail- The 9040 Classic Power Supply is avail-
able for hand and automatic REA and
able for hand and automatic REA and able for hand and automatic REA and able for hand and automatic REA and able for hand and automatic REA and
M90 applicators as follows:
M90 applicators as follows: M90 applicators as follows: M90 applicators as follows: M90 applicators as follows:
76447-10X
76447-12X
76447-13X
76447-14X
70404
70929
72316
70393
77132
9040 9040 9040 9040 9040
Part # Part # Part # Part # Part #
Applicator Applicator Applicator Applicator Applicator
# # # # #
Used With Used With Used With Used With Used With
Applicator Type
Applicator Type Applicator Type Applicator Type Applicator Type
REA-IV Applicator
REA-III Solvent Applicator
REA-III Water Applicator
REA-III Automatic
M90 Classic Applicator
Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic
Supply Air: Supply Air: Supply Air: Supply Air: Supply Air: 100 psi maximum > Except where indicated, this manual is
applicable to all models of the 9040 Classic
Power Supply for the REA/M90 Systems.
N O T E N O T E N O T E N O T E N O T E
> The 9040 Classic Power Supply is fac-
tory supplied with a cabinet latch that can
be opened using a slotted screwdriver. If
desired, the standard latch can be easily
replaced with a latch that requires the use
of a key to open. This key lock can be or-
dered from: Austin Hardware, Inc., 8001
Central Ave. N. E., Minneapolis, MN
55432; 1-800-328-2423; Key Lock Part
Number: C8052-14A.
N O T E N O T E N O T E N O T E N O T E
ARCHIVE