Ransburg MCV2 Dual Purge Color Changer A10986-XX_A10993-XX - Manual (Page 18)

MAINTENANCE
Figure 9: Seat Removal
Figure 8: Valve Removal
NOTE
> When replacing or repairing any compo-
nents in this system, before reassembling,
apply a light coat of food grade
petroleum jelly to all o-rings.
GENERAL MAINTENANCE
>
Prior to servicing the unit, insure that all
fluid pressure is relieved to atomsphere. A
solvent purge should be performed if pos-
sible.
W A R N I N G
!
NOTE
> This procedure allows valve and/or seat
removal without removing the valve slice
from the assembly.
Value and Seat Removal
To remove the valve for any reason, insert the
(4) prongs from the tool into the holes on the top
the Microvalve. Using a 1/2” socket, adjustable
wrench or a combination box open end wrench,
turn counter-clockwise to remove the valve.
To remove the seat, insert the seat removal tool
into the seat and turn counter-clockwise using a
3/8” socket, adjustable wrench or combination
box open end wrench.
MCV 2 Dual Purge Color Changer - Maintenance
15 CS-05-01.9
Ransburg