Ransburg RMA Direct A12867 - Manual (Page 69)

RMA-303 Direct Charge - Maintenance
LN-9266-11.3 66
Frequency (Maximum)
Procedure Mid-Shift End of Shift Weekly
2
Weeks Monthly 3 Months 6 Months Yearly
Mid Shift Cleaning X
• Wipe shroud
• Visually inspect cup
End of Shift Cleaning X
• Wipe shroud
• Wipe bell cup down
• Change cloth cover
Shaping Air Shroud X X X
• Clean inner shape air ring
• Clean outer shape air ring
• Remove and clean
Bell cup removal/
inspection/
X X
cleaning
Fluid tip inspection/
cleaning
X X
Inspect Valve and Seat X
Assembly in valve module
for leaking
Replace Valves and Seats X
in valve module
Low Voltage Cable X
Inspections
High Voltage Testing X
Inspection of Tubing Bun-
dle
X
Regrease Tubing Bundle X
Replace Tubing Bundle X
Inspect Turbine Spindle
taper and threads X X
Replace Bell Cups X X
Inspect all screws X
• Replace if broken
• Inspect for wear
• Tighten per specifications
Replace Splash Plates X X
Inspect and Clean Spindle X X
Bore and Fluid Tube OD
Inspect for Fluid Leaks Daily
Check External Cup Flush X X
Carbide Tip for blockage
RMA-303 PREVENTIVE MAINTENANCE SCHEDULE