Acer Altos G320 Series - Manual (Page 63)

53
Peripheral Configuration
The Peripheral Configuration submenu lets you define the parameter
settings for the system’s serial and LAN port.
Max CPUID
Value Limit This should be enabled in order to boot
legacy operating systems that cannot
support CPUs with extended CPUID
functions. Disable
Enable
Display Setup
Prompt When this parameter is enabled, you will
be prompted to press F2 to run BIOS
during boot up. On
Off
Parameter Description Option
Serial Port Enables or disables the onboard serial
port. Enable
Disable
Parameter Description Option
AA G320_UG_EN.book Page 53 Tuesday, August 30, 2005 2:34 PM