Acer Altos G320 Series - Manual (Page 65)

55
ATA/IDE Mode When set to Enhanced, it will enable all
SATA and PATA controllers.
When set to Legacy, it will enable up to
2 IDE channels for OS that requires leg-
acy IDE operation.
Enhanced
Legacy
Configure S-ATA
as Set SATA to IDE or RAID.
This parameter is disabled when ATA/
IDE Mode is not set to Enhanced mode.
IDE
RAID
AHCI
S.M.A.R.T. Enables or disables S.M.A.R.T. (Self-
Monitoring, Analysis and Reporting
Technology) function. Enable
Disable
SATA Port 0, 1, 2
and 3 Displays the SATA HDD connected on
the SATA port.
Primary Master Specifies the current configuration of
the IDE device connected to the master
port of the primary IDE channel.
Primary Slave Specifies the current configuration of
the the IDE device connected to the
slave port of the primary IDE channel.
Hard Disk
Pre-Delay (Sec) Select the time out value for detecting
ATA/ATAPI devices.
Used with older IDE devices with longer
spin up times.
0
5
15
20
25
30
Parameter Description Option
AA G320_UG_EN.book Page 55 Tuesday, August 30, 2005 2:34 PM