Acer Altos G320 Series - Manual (Page 44)

3 System upgrade 34
5 Place the HSFD assembly upside down on a flat surface.
Note: Wipe off the thermal grease from both the HSFD assembly
and CPU using an alcohol pad.
Removing the CPU
1 Pull the CPU socket retainer lever to a fully open, upright position
(1).
2 Lift the load plate (2).
3 Pull out the CPU from the socket (3).
Installing the CPU
The mainboard has a 775-pin processor socket that support Intel
Pentium D, Pentium 4, or Celeron D processors.
1 Observe the ESD precautions and pre-installation instructions
described on page 25.
2 Locate the CPU socket on the mainboard.
3 Push the CPU socket retainer lever down and away from the socket
(1).
4 Lift the load plate (2).
AA G320_UG_EN.book Page 34 Tuesday, August 30, 2005 2:34 PM