Hauler Racks Universal Steel Van Rack (SV2-1) User Manual
Page 4
4 of 7
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Step 3 Crossbar subassembly
Slide in the 1-1/2” square tube into 1-3/4” square tube and align the two bolt holes.
Apply a small bead of silicone around the bolt holes to seal out water.
Bolt the two bars together using (2) 3/8”-16 x 2-1/2” hex head bolt, (4) flat washers and (2) 3/8”-16 nylon insert lock
nut.
Repeat for other crossbar.
Step 4 Mount tubes to upright
Slide the 1-3/4” square tube into the upright opening as shown and align the holes.
Secure using 3/8”-16 x 2-1/2” hex head bolt, flat washer, 3/8” split lock washer and 3/8”-16 nut.
Repeat for remaining 1-3/4” square tubes.