Hauler Racks SERVICE BODY ‘A’ MOUNT RACKS User Manual
Page 12
10. Mounting rack on Service Body
With an assistant, turn the rack upright and place the rack on the service body.
Slide the legs down so that the hex bolt heads slide into the center channel of each ribbed leg.
Sliding leg down the mount bolts
Tightening leg to mounting brackets
Repeat for other legs.
Adjust the height so that there is at least two inches of clearance over the highest point on the cab and
that the rack is level. This the recommended minimum clearance needed for the rack over the cab. If
you do not have this clearance with the current legs, you may need longer legs.
Check the rack with a level side to side and front to back. Adjust if needed.
Tighten bolts to secure the legs to the mounting brackets.
HAULER RACKS, INC.
Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 12 of 16 WWW.HAULERRACKS.COM