Hauler Racks V11SEV-1 - Manual (Page 3)

1. (Continued) Connect front and rear sections
Note the orientation of the other carriage bolts on rail assemblies.
For the top round tube, use (2) 3/8”-16 x 1-3/4” carriage bolts, (2) 3/8” split lock washers and (2) 3/8”-16 nuts, install hardware
finger tight. Repeat for other side rail.
For the lower rectangle tube, use (4) 3/8”-16 x 3” carriage bolts, (4) 3/8” split lock washers and (4) 3/8”-16 nuts, install hardware
finger tight. Repeat for other side rail.
2. Assemble Clips
Place the rubber end cap on the clip as shown. Repeat for remaining clips.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 3 of 10 WWW.HAULERRACKS.COM