Hauler Racks ULRE-1 User Manual
Page 2
2. Assemble “E” mounts plate to curved arm by placing the (2) 5/16”-18 x 1” carriage bolts as shown through the “E” mount plate and curved arm.
Secure and tighten the curved arm to the “E” mount plate with (2) 5/16” split lock washer and (2) 5/16”-18 nut.
Repeat for remaining “E” mounts plates.
3. Mount the clip to the side of the “E” mount plate loosely using the ¼” x ¾” Phillips screw and ¼ split lock washer. Do not tighten the screw as
adjustments may need to be made when mounting to vehicle.
Repeat for remaining mounts
HAULER RACKS, INC. Page 2 of 6 Toll Free: 1-800-843-5445
7109 31
st
Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
WWW.HAULERRACKS.COM