Gentec-EO T-Rad (DB-15) - Manual (Page 31)

T-RAD-DB15--USB Instruction Manual Version 2.1 December. 2012 31
1.11.11 Update Firmware
Calls a VI that allows you to update the T-RAD firmware using the USB port and a new firmware file
obtained from Gentec-EO. New firmware updates are posted on the Gentec-EO website as they
become available.
Press the Load New Firmware File button to select a new firmware file you have downloaded from the
Gentec-EO website. You can exit the update with the Exit Firmware Update button. This will leave the
current firmware intact. Once the file has been processed, the Update Firmware button will become
active. Press it to begin the update. Follow the prompts to complete the update. You must let the
update complete and cannot exit the update once this button has been pressed.