Gentec-EO T-Rad (DB-15) - Manual (Page 22)

T-RAD-DB15--USB Instruction Manual Version 2.1 December. 2012 22
1.7.10 Reset
The Reset button resets the current data set in all collection modes.
1.7.11 Auto Reset
Resets the batch when the Current Sample meets the Batch Size if in Fixed Sample Collection
mode.
1.7.12 Sample Collection
Sample Collection is:
Continuous. Data is streamed whenever Data Collection is on. Always only withTime Interval Collection
mode.
Fixed. Data is collected whenever Data Collection is on until the Current Sample meets the Batch
Size.
1.7.13 Collection Mode
Collection Mode is:
Streaming. Data is streamed at the data frequency rate. Always only with Fixed Data Sample Collection
mode.
Time Interval. Data is collected when the selected time interval is met. The Time Interval control
is shown when Collection Mode is set to Time Interval.
1.7.14 Time Interval (s)
The Time Interval to wait between taking a data point. Intervening data points are discarded.
1.7.15 Digital Indicators
The Indicators on the Digital Display area are:
Live Data
Rv
Wavelength (nm)
Frequency (Hz)
Frequency Range
Frequency In Range
Locked
Current Sample
Corrections Active
1.7.16 Live Data
The Main Display for:
Power (W ) or Irradiance (W/cm
2
) .