Gentec-EO T-Rad (DB-15) - Manual (Page 23)

T-RAD-DB15--USB Instruction Manual Version 2.1 December. 2012 23
1.7.17 Rv
Responsivity in V/W of the sensor for the selected Range.
1.7.18 Wavelength (nm)
The wavelength of the light source being measured. Enter this value on the Setup Tab.
1.7.19 Frequency (Hz)
The frequency of the measured data in Hz. Resolution is 0.1Hz.
1.7.20 Frequency Range
The allowed range of chopper (Radiometers) frequencies.
1.7.21 Frequency in Range
Illuminates when the Frequency is within the calibrated range.
1.7.22 Locked
Illuminates when the device is Locked to the synthesized reference frequency used by the Digital
Lock In algorithm and Data Collection is active.
1.7.23 Current Sample
The current sample in the batch. Resets with the Reset Button or and Auto reset in Fixed Sample
Collection Mode.
If the Current sample exceeds the batch size when Fixed is selected, a Reset must be issued to
start the new batch.
1.7.24 Corrections Active
Illuminates when W avelength Corrections or Transmissivity Corrections or Area Corrections are
active.