Gentec-EO M-LINK User Manual
Page 33
M-
LINK User’s Manual Revision 3.0
27
With the exception noted above, the host software should wait for an instrument reply before executing a
subsequent command or query.
VER
Queries the Firmware Version. No arguments are used.
Example.
Send: verCRLF
Reply: 1.03CRLF
RNG
Sets or Queries the instrument range
Example.
Send rng27CRLF sets the range to index 27, the 30mW or 30mJ range. See
table below for ranges versus indices
rngCRLF queries the current range.
Example
rngCRLF returns the range index
Reply 27CRLF
TRG
Sets or Queries the instrument trigger level
Example.
Send trg15CRLF sets the trigger level to 15% of the set range.
trgCRLF queries the current trigger level.
Example
trgCRLF returns the trigger level
Reply 15.0CRLF