General Tools and Instruments HT10 - Manual (Page 16)

• To open a previously saved data log, click the Open
button. This function is also available as the “View
previously saved data” option shown in Fig. 2.
• To export a file to Excel for advanced trending and
analysis, click the Export to Excel button.
OTHER INDICATIONS
As mentioned earlier, the MODE button and the pair of two-
color LEDs work together to indicate the current working
status of the HT10. For example, the MODE button can be
used to confirm whether or not the unit has been configured
(activated) using the software’s Setup window (see Fig. 3):
• If the unit is ready to log data, a quick press of the
MODE button will cause both LEDs to flash green once.
• If the HT10 needs to be configured, the two LEDs will
alternately flash red and green twice.
If a quick press of the MODE button causes both LEDs to
flash red once, logging has been stopped because the
memory is full.
During data logging, the pair of two-color LEDs will flash
green or red to indicate whether measured humidity and
temperature values are within or outside the band between
the preset low and high alarms:
• The LEDs will alternately flash green one time each if
the values of both parameters have not exceeded their
setpoints.
• The LEDs will alternately flash red one time each if the
value of either parameters has exceeded its setpoints.
16