General Tools and Instruments DA833 - Manual (Page 3)

GB
3
TIME Button
- Alternates between Time displays
[+ -] Button
- Changes the value of a setting
- Clears memories
- Activates / deactivates alarm
- Selects units of measure
- Switches from fast to slow sampling rate
Battery Compartment
- Houses 2 (two) CR-2032 batteries
- RESET Button
Sensor Vents
- Openings for atmospheric sensitive sensors
Neck Cord
- Facilitates carrying around the neck or attached to
a rucksack or belt
FULL SEGMENT DISPLAY
Hand Grips
- Rubberized grips that prevent the unit from being
accidentally dropped
Wall-Mount Bracket
- to mount unit to wall or vertical surfice
INSTALLING AND REPLACING OF
BATTERY
The DA833 operates with 2 (two) CR-2032 Lithium batteries that
are included with all new units. During initial packaging, the
batteries were insulated with a red tape so as to maximize the shelf
life of the product. Before use, remove the insulation tape by
gently pulling.
Upon removal, the display will show a full-segment display for 3
seconds; it will then enter the Normal Altitude Display.