General Tools and Instruments DA833 - Manual (Page 13)

GB
1 3
3. Press [+] or [-] to select US for US format shown as month /
date or EU for European format shown as date / month.
4. Press [TIME] again, the current month flashes.
5. Press [+] or [-] to increase / decrease the month digits. For
rapid acceleration of the digits, press and hold.
6. Press [TIME] again, the current date flashes.
7. Press [+] or [-] to increase / decrease the date digit.
8. Press [TIME] again, the 12-hour or 24-hour indicator starts
flashing.
9. Press [+] or [-] to select between 12-hour or 24-hour time
format.
10. Press [TIME] again, the hour digit starts flashing.
11. Press [+] or [-] to increase / decrease the hour digit.
12. Press [TIME] again, minute digits start flashing.
13. Press [+] or [-] to increase / decrease the minute digits.
14. Pressing [TIME] a last time to exit.
Note: The unit will return to Normal Barometer Display or
Altitude Display if no buttons are pressed for 1 minutes during
setting sequence.
The Daily Alarm
The DA833 has a daily alarm that can be programmed to activate
at the same time each day.
To Set the Alarm Time:
1. Enter Alarm Time Display
2. Press and hold [TIME] for 2 seconds, the [ ] icon will be
displayed and the [ALARM] indicator and the hour digits
start flashing.
3. Press [+] or [-] to increase / decrease the hour digits.
4. Press [TIME] again, the minute digits flash.
5. Press [+] or [-] to increase / decrease the minute digit.
6. Press [TIME] again to set and activate / deactivated the alarm.
7. Press [+] or [-] to select between and Activate. The alarm icon
will only appear when the alarm is set.
8. Pressing [TIME] a last time to exit. The ALARM indicator
stops flashing.