General Tools and Instruments BF10 - Manual (Page 10)

CHANGING THE BATTERY
When the yellow LED on the receiver (Fig. 1, Callout E)
illuminates, it’s time to change the battery. The battery
compartment (Callout J) is accessible from the back of the
receiver.
To replace the battery:
1. Open the compartment by loosening and removing the
single Phillips-head screw securing the compartment cover
to the bottom of the receiver. Remove the screw and cover
and set them aside.
2. Remove the old battery and plug a fresh “9V” battery into
the wired socket inside the compartment. The terminals of
the battery and the socket mate in only one way, with the
smaller male terminal plugging into the larger female
terminal.
3. Replace the battery compartment cover and secure it to
the back of the receiver with the Philips-head screw.
WARRANTY INFORMATION
General Tools & Instruments’ (General’s) BF10 AC Circuit
Breaker Finder is warranted to the original purchaser to be
free from defects in material and workmanship for a period of
one year. Subject to certain restrictions, General will repair or
10
BF10-Manual_FINAL4-082012_awb 8/20/12 10:31 AM Page 10