Fairbanks IM 6000 Series In-Motion Scale System with FB3000 - Manual (Page 4)

50792 4 05/05 Issue #1
A. Introduction
The Fairbanks IM 6000 is a high speed In-Motion weighing system and is the next generation
of In-Motion weighing systems for Fairbanks Scales. The IM 6000 uses Fairbanks FB3000 instrument
featuring a PC/104 internal structure which can process boxes at speeds of up to 360 ft/min depend-
ing upon conveyor and scale conveyor configurations.
B. Specifications
1. Instrument Specifications
CPU VIA Ezra/Eden (ECBA package) 1 GHz processor
BIOS Award® 256K Flash BIOS
Chipset VIA VT8606 + VT82C686B
I/O Chipset Built-in VT82C686B + Winbond 83977EF
Memory One (1) 144-pin SDIMM socket support up to 512 MB SDRAM
Enhanced IDE Support up to two (2) IDE devices ( Ultra DMA 33/66/100)
FDD Interface Supports up to two (2) floppy disk drives (34-pin header)
Parallel Port One (1) Bi-directional parallel port. Supports SPP/ ECP/ EPP
Serial Port Three (3) RS232 and one (1) RS232/ 422/ 485 serial ports
KB/ Mouse Connector Supports PC/AT keyboard PS/2 mouse
Power Management APM 1.1 Compliant
PC/104 Connector One (1) PC/104 Connector
Digital I/O Eight (8) digital inputs and outputs
Watchdog Timer Can generate a system reset. Supports software selectable time-out
interval.
Battery Lithium battery for data retention up to ten (10) years under normal oper-
ating conditions.
Software Driver Microsoft® XP Home
Ethernet Interface PCI 100/10 Mbps Ethernet Controller
Section 1: General Specifications