Fairbanks IM 6000 Series In-Motion Scale System with FB3000 - Manual (Page 11)

50792 11 05/05 Issue #1
Ticket Number Enter the ticket number required via the indicator’s numeric keypad or through a
external keyboard accessory.
IN-Motion
These values adjust the performance of the systems operation. Once these are
Options
configured at installation, the values should not require any further changes.
These adjustments should be made by authorized factory trained personnel only.
Enable Weight This value is the weight threshhold which begins the weighing process. This set-
ting will enhance stability if the Gross weight is less than Enable Weight, the dis
play will indicate 0.00 weight . Also if the Gross weight is less than the Enable
Weight for a count equal to the Idle Counter setting, an Auto Zero is performed.
Idle Counter This value is dependant on the speed of the A/D and is used for Auto Zeroing.
Spacing This value is used to shift the start and stop points for weights to be included in
Adjustment box weight calculations. A buffer of box weights (most recent at the top of the
list) is kept for each box from the time it triggers the On Scanner to the time it
triggers the Off Scanner. If there are two boxes on the scale at the same time
a two box error is transmitted. The weights in the final calculation are offset to
exclude two box weighments. The offset value cannot be greater than the spac-
ing adjustment setting.