Fairbanks IM 6000 Series In-Motion Scale System with FB3000 - Manual (Page 22)

50792 22 05/05 Issue #1
A. Errors
Symptom Solution
Load Cell Failure(s) Weight is behind zero by a large
amount. Check for binds in the
platform.
Load cell has failed. Replace
cell.
No indication from Check for +12vdc.
Green or Red Lamps
for Scanners
Check sensor wiring connections
or check for damage.
No Scale Port Found... Check output from High Speed
A/D.
Check interface cable for broken
wires.
Check COM 2 for proper opera-
tion.
Check for loose interface con-
nections
More than two boxes on the scale Check sensor wiring connections
or check for damage.
Two boxes on the scale Check physical box spacing and
spacing programming.
Error calculating box weight Check scale calibration.
Section 5: Service and Maintenance