Section 3: user operations, Moving the scale with a wheel kit, Changing position of top plate – Fairbanks Aegis Drum Scales User Manual

Page 18

04/10

18 51190 Rev. 2

Section 3: User Operations

3.1. MOVING THE SCALE WITH A WHEEL KIT

1. Remove all objects from the Platform.

2. Remove the AC Power from the

Instrument, if applicable.

3. Pull down each of the three (3) pivoting

Wheel Cam Levers, lowering and locking
each wheel onto the floor.



Please work carefully.



Possible Pinch Point.

4. Using the T-handle, move the scale to the

desired location.

5. Once the scale is repositioned, raise the

wheels by lifting each of the Wheel Cam
Levers.
─ The wheels will be raised approximately

1/16” above the floor line.

6. Reapply AC Power to the Instrument, if

applicable.

3.2. CHANGING POSITION OF TOP PLATE

The Top Plate Assembly can rotate the
Indicator to any viewing angle (360°).

1. Loosen the three (3)

¼” Allen

Screws

on the collar of the Top Plate

Assembly.

2. Rotate the Top Plate Assembly to the

best position.

3. Re-tighten the set screws.