Fairbanks Aegis Drum Scales - Manual (Page 10)

Section 1: General Information
04/10 10 51190 Rev. 2
1.3. CONFERRING WITH OUR CLIENT
• The technician must be prepared to recommend the arrangement of components
which provide the most efficient layout, using the equipment to the best possible
advantage.
• The warranty policy must be explained and reviewed with the customer.
• Refer to Instrument Manual for power requirements.
1.3.1. Service technician’ s Responsibilies
 All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability
to be adjusted or calibrated to performance specifications may be charged to
warranty.
 If the equipment consists of printed circuit assemblies, they must be handled
using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not permitted.
─ The assemblies must be properly packaged in ESD protective material and
returned intact for replacement credit per normal procedures.
1.3.2. Users’
Responsibility
 Absolutely no physical, electrical
or program modifications other
than selection of standard
options and accessories are to
be made to this equipment.